F650 and F650GS Gear vs. RPM vs. Speedo
by Kristian #562
You can Change the RED Cells and the Speed or the RPM Will Change Automatically.
For practical reasons, the figures are rounded to the nearest multiple of 50 rpm.
GEAR	SPEED (kph)	EXPECTED RPM		GEAR	SPEED (mph)	EXPECTED RPM		GEAR	RPM	EXPECTED SPEED (kph)		GEAR	RPM	EXPECTED SPEED (mph)
1st	20	2600		1st	15	3150		1st	2600	20		1st	3150	15
	40	5200			25	5250			5200	40			5250	25
2nd	40	3300		2nd	25	3350		2nd	3300	40		2nd	3350	25
	60	5000			30	4000			5000	60			4000	30
	80	6650			35	4650			6650	80			4650	35
3rd	40	2500		3rd	25	2500		3rd	2500	40		3rd	2500	25
	60	3750			35	3500			3750	60			3500	35
	80	5000			40	4000			5000	80			4000	40
	100	6200			45	4500			6200	100			4500	45
4th	60	2950		4th	35	2800		4th	2950	60		4th	2800	35
	80	3950			45	3600			3950	80			3600	45
	100	4950			55	4400			4950	100			4400	55
	120	5950			65	5200			5950	120			5200	65
	140	6950			75	6000			6950	140			6000	75
5th	60	2500		5th	55	3650		5th	2500	60		5th	3650	55
	80	3300			65	4350			3300	80			4350	65
	100	4150			75	5000			4150	100			5000	75
	120	5000			85	5650			5000	121			5650	85
	140	5800			90	6000			5800	140			6000	90
	160	6650			100	6650			6650	160			6650	100
For Stock 16T Front, 47T Rear Sprocket							Ratios	1.946		(KPH)
17" Rear Wheel, 130/80 Tyre							15.720	2.750	1st	32
Cut it out, stick it on your Screen							10.004	1.750	2nd	50
Choose an Empty Road and Test it.							7.506	1.313	3rd	67
Perhaps use a Passenger to read the Dial while you DRIVE.							5.974	1.045	4th	84
							5.002	0.875	5th	100
							2.938	16
							Teeth	47	Gear	(MPH)
							RIM	17	1st	20
							Tyre	130	2nd	31
	1.609347	kms/Miles					Tyre	80	3rd	41
If you want to know the Speed at a certain RPM, change this Figure:								4,150	4th	52
									5th	62
While rounding to the closest 50rpm is considered adequate, if you want to know the Exact Figures, remove "MROUND(" from the beginning of the formulas and ",50)" from the end.
You MUST Install the Excel Analysis Toolpak to Run this Function. Tools, Addins, Check "AnalysisToolpak"										For the Spreadsheet in Excel Format, Click the Link